Agile AL2800 Blue Quilt Uniform Profile
And another great guitar from Agile. The top is nothing like the Rondo website picture but as you can see a very beautiful top. This guitar is built well, plays well, looks great and sounds good. These pickups are quite different from my 3000's but they sound good.
Heres the specs:The New 2800 Features New Hi Output Pickups and and Ultra Fast Neck!
NOTE: Now ships with ALL BLACK HARDWARE
New AL-Hot High Output Ceramic Pickups
Uniform Neck Profile - For ultra fast playing - 21.5mm at the frest fret and 22mm at the 12th fret.
Solid 2 pc Mahogany Body with Canadian Maple Quilt Top
D'addario 10-46 strings installed at the factory and a professionally cut graphite nut
Hand filed frets (vs machine filed on the 2500), for professional feel and playability
Full body, neck and headstock binding
Die-cast Grover tuners with 18-1 ratio for ultra fine tuning
Jumbo 2.7mm frets and a 13.7" (350mm) radius neck for fast play
22 fret maple set neck with Rosewood fretboard with trapezoidal inlays
Two volume and two tone controls, plus a three way pickup selector switch
Width of the neck at the nut: 1 5/8"; at the 21st fret: 2 3/16"
Overall length 40"; Scale length: 24.7".
Body thickness 2" at edge; Width at the widest point: 13"
Bridge pole spacing is 3", and the Tail piece pole spacing is 3 1/4"
Actual Weight is only 10 lbs
Pickup spec: Magnet: Ceramic, Coil 42awg (.063mm)
Neck: Inductance: 4.85 Henrys, DC Resistance: 7.8k ohms Turns 5,550
Bridge: Inductance 8.7 Henrys DC Resistance: 8.7k ohms Turns 6,050
Agile AL3000 Tribal Blue
Wow is all I can say about this brand new Agile. The Tribal Blue is incredible and the action is super great. Tone quality is alot like the other 3000's. I have to say that this guitar is better than I ever expected. This one is definately going into my current rotation.
Specs:Solid mahogany (not a multi-ply!) arch top body
High quality Canadian Maple Top (100% real wood top-not a photo top!)
Triple bound body, and headstock. Single binding on neck.
Improved Nickel plate hardware, including Nickel die-cast Grover tuners with 18-1 turning ratio for ultra fine tuning (Model 102-18N)
Two Type V Alnico humbucker pickups for warm, tradional sound
The AL-3000 now comes with improved wiring (single conductor braided 18 gauge American wire for pickups), improved pots (now higher voltage with brass shafts for reduced noise) and an improved pickup selector switch
Two volume and two tone controls, plus a three way pickup selector switch
One piece Mahogany set neck with 13.7" (350mm) radius neck for fast play and adjustable truss rod
Ebony fretboard with 22 Jumbo frets and real Abalone Trapezodial inlays
The AL-3000 features GHS strings installed at the factory and a professionally cut bone nut
A pre-cut graphite nut is also included in the bag with the trus rod adjuster for those who prefer graphite
Individually hand filed frets for professional feel and playability
Width of the neck at the nut: 1 5/8"; at the 21st fret: 2 3/16"
Neck taper/thickness at the 1st fret: 21.5 mm; at the 12th fret: 23.5mm
Overall length: 40"; Scale length: 24.7"
Body thickness: 2" at edge; Width at the widest point: 13"
Bridge pole spacing is 3", and the Tail piece pole spacing is 3 1/4"
Actual Weight is only 10 lbs
SX SST57 CAR
This is a great strat copy that really rocks. Beautiful Red with pearloid pickguard. This guitar was modded by a friend and has carvin pickups, pearloid pickguard, new knobs, nut & tuners i believe. Great rockin axe.
SX SST57 Blackie
Another SX strat copy. this was the 1st one i traded for. it was also modded with new alnico v's, pearloid pickguard, knobs, electronics and nut. This is a killer guitar with a great sound.
Ok can we saw WOW! This beauty is an SX strat copy modded with lace sensors, pearloid pickguard, knobs, electronics, nut and tuners. The mahogany body is so sweet. this guitar sounds so smooth and is a lot of fun to play!
Cort Curbow Bass
I appologize for the bad picture, but this is the only picture I have currently. This is a great bass, very clean and punchy with tons of tone. It has active electronics in it.
Sx STL50 Black - Project Guitar
this guitar totally rocks. wow starting with $109.99 only and plays and sounds incredible. i am going to be modding this guitar... why since i like it so much... because i want to learn how to mod and have some fun getting creative.
Specs:
Traditional / retro styled 3-piece body made of solid Alder
Great sound perfect for rock, jazz, blues, country, and more
Maple neck with Aged Maple fretboard, 21 jumbo (2.7mm)frets, and dot inlays
Chrome covered mini single coil pickup and standard single coil pickup
String-through body bridge with 6 adjustable saddles
Passive volume and tone controls with classic blade 3-way pickup selector switch
Chrome hardware
Width of the neck at the nut: 1 5/8"
Neck radius: 13.7" (350mm)
Scale length 25.5"
Overall length 39"
Width at the widest point: 12 3/4"
Thickness of body 1 3/4"
Actual Weight is only 8 lbs
SX SJB-75 B MRD Jazz Bass
this is one killer looking and playing jazz bass. great tone and love the black block inlays. this bass is amazing. i may decide to do some mods on this one just to make it that much better. but overall its super bang for the buck!
Specs:This new SX bass features classic jazz styling at a fantastic price point!
The body of the bass is composed of a beautiful solid Ash sealed with a poly-urethane finish to let the natural wood show through
Dual cutaways allow access to the highest frets
Bound Bolt on Maple neck
Maple fretboard with 20 jumbo frets and contrasting black block inlays creates a stunning look
The body on this bass is worth the price alone!
Two J-Style pickups are controlled from two volume and one tone control for lots of sound flexibility
Bold chrome vintage saddle and black pickugard to create a powerful look
Pickup dimensions are: Neck: 3 5/8" x 3/4"Bridge: 3 11/16" x 3/4"
The head stock features chrome hardware
Width of the neck at the nut: 1 9/16"; at the 20st fret: 2 9/16 "
Thickness of the neck at the first fret is 7/8"
Overall length 45"; Scale length: 34"
Width at the widest point: 13" Body Thickness is 1 1/2"
Actual Weight is only 10 lbs
Fender Jazz - Geddy Lee Model
I am a huge fan of Rush and have always loved their music. Although I am a guitar player over being a bass player, I love Geddys playing and tone. So I've always wanted a Rick and now the Fender Jazz models... you know something like what Geddy plays and here my Fender Jazz. oh, this bass just sounds so good and play so smooth.
Specs:The bass has an alder body; the one-piece C-shaped maple neck (thin) has a maple fingerboard with black binding and black rectangular position markers. The two vintage Jazz Bass single-coil pickups crackle with life and bristle with the energy; other features include chrome hardware, vintage-style tuning machines and a Badass® Bass II™ bridge.
SX KY1 Amber
This is a cool guitar with a little bit of a Les Paul / PRS feel. It's got an Amber Flame top with Mahogany back and neck and rosewood fingerboard with abalone bird inlays. I bought this from the same friend that i got the Sx Strats. He upgraded the pickups to some GFS and the bridge has also been upgraded.
SX KY1 Ash
Another KY1 that is a great little guitar with tons of tone. The Ash top and maple fingerboard set each other off great. This guitar was also from the same friend of the Sx Strats. He modded this one to new pups with push pull single to hum in the middle humbucker and push pull for a mid sweep.
Dillion DXI 500
This is one really very cool guitar. This is a smokin hot rockin axe here. I am still stunned to find such cool guitars for such a great price. This is another one from my friend. He has upgraded the pickups which are both coil tappable. Giving you the flexibility of humbucker and single coil switching. 15k pots and this guy is ready to rock along all those active pups! Oh and it looks great too. Isis inlays abalone knobs ... it's all cool.
Ibanez (94) Jem 555
I took a trip downtown to hit the pawnshop to see if they had any cool bargains there and found that they were closed. Up the street, I went into a small local guitar store and found this guitar for sell. I looked it over then walked out of the store to do some quick research on it to see exactly what it was and how much it should be worth. After approval, I went back in and asked to play it thru an amp and liked the way it played and sounded. It was owned by a young kid that worked at the store and he was willing to come down on the price. This besides being a cool guitar, plays nicely and has that signature sound. The Jem 555 is a Korean made model (Cort Factory) not the Japanese model. These were more affordable for the guitarist on a budget.
Specs:Jem neck
3pc. Maple Neck Material
American Basswood Body
24/Jumbo frets
Rosewood Finger Board
Edge Pro II Bridge
DiMarzio Evolution (H) Neck PU
DiMarzio Evolution (S) Mid PU
DiMarzio Evolution (H) Bridge PU
Half Tree of life Inlay
Ibanez S470DXQM BLB
This is an incredible guitar. It plays great. The action is dead on and the zero resistance tremolo is the best floyd type ever. My wife got me this for my b-day and it's a real beauty. The body is has the mahogany but sculpted body to fit like a glove with the awesome quilt top and the neck plays super fast.
Way to go ibanez!
Specs:
Neck: 3pc Wizard II neck
Neck Type: Wizard II
Body: Mahogany body/ Quilted Maple top
Frets: Jumbo frets
Fingerboard: Bound Rosewood
Inlay: Abalone dot inlay
Bridge: ZR bridge
NeckPU: IBZ INF1 neck pu
MiddlePU: IBZ INFS1 mid pu
BridgePU: IBZ INF2 bridge pu
HW Color: CK
Gibson SG Supreme - 2001
.JPG)
.JPG)
.JPG)
I have been gassing for an SG for a while now and I have never owned one so it was a challange to figure out exactly what I was looking for. I really liked the Epiphone SG Prophecy GX but couldn't find one anywhere to try out. I didn't want to spend the money for a gibson but found this one on craigslist and it kept coming back to my mind. I have always loved the SG Supreme but didn't want to spend that kind of money for one. This one was owned and played a lot.. a bit beat but still very worth it to me. So here it is and as you can tell I am always a sucker for cool tops and ebony fingerboards.
Specs:
The SG Supreme sports the Flame Maple top that for decades has distinguished the most valuable and desirable Gibson Les Paul models. Rich translucent finishes enhance the figuration of the wood grain, giving the SG Supreme a unique and memorable look.
Technical Info
Manufactured in: Nashville, TN
BodyTop Species: AA Flame Maple
Back Species: Mahogany
NeckSpecies: Mahogany
Profile: '60s style slim taper
Peghead Pitch: 17
Thickness at 1st Fret: 0.800
Thickness at 12th Fret: 0.895
Neck Joint Location: 22
Head Inlay: Split diamond
Head Bind: Single-ply
FingerboardSpecies: Ebony
Scale Length: 24-3/4 in.
Number of Frets: 24
Nut Width: 1-11/16 in.
Width at 12th Fret: 2.062
Inlays: Split diamond
Fingerboard Bind: Single-ply
HardwarePlating Finish: Chrome on Midnightburst
Tailpiece: Stopbar
Bridge: Tune-o-matic
Knobs: Black top hat with inserts
Tuners: Grover Kidney
ElectronicsPickups: 2 '57 Classic humbuckers
Controls: 2 volume and tone, 3-way switch
2009 Charvel So Cal - Candy Plum
.JPG)
As soon as I first saw the So Cal's, I knew I found my next guitar. It started out by searching for something like a Brad Gillis strat. I really wanted the red with black hardware and pickguard. Then I went to Sam Ash to look at what they had and played the green one. Now I loved the green and the gold looks awesome too. But then after checking them out on the Charvel site, I saw the purple and the decision was over. I called Sam Ash back and they got a purple one in that week. Of course I went over to check it out and a bit later it was mine. I love it! The neck feels so good and I love the snappiness of the maple fingerboard. This guy rings and resonates really nice. The pickups are killer. Very satisfied I am!
Specs:
Alder Body
1 Piece Maple Neck
Compound Radius 12-16
DiMarzio Tonezone Bridge
DiMarzio Evolution Neck
Floyd Rose
Grover Mini Tuners
Black Hardware
2009 Douglas Ash Burl Tele
I just picked this up last week and it is really a great tele copy. I traded with a friend and he has upgraded the pots and caps, fret leveled and setup. It's my second go at trying a tele model. It's very cool
Xaviere Glitter Paul
I also picked this one up on my trade along with the Douglas Tele. This is a Xaviere from GFS. Even though I grew up loving glam, I am still not a fan of the glitter guitars, but this one I have to say sounds and plays really good. The GFS fat & crunchy pickups sound great. It's not as heavy and the body is not as thick as a typical LP.
2009 ESP LTD Michael Wilton - MW600
Happy BDay to me from the wife. Wow, my first skull guitar. I saw Michael play his on one of my dvd's and I remember thinking... how cool this guitar was and it sounded so clean and cool. Well lets just say it's my BDay and they just knocked the price down to a half on these and there you have a sweet present ready for me! I love this guitar... it sounds so good.
Specs:
- Bolt-On
- 25.5” Scale
- Alder Body
- Maple Neck
- Maple Fingerboard
- Locking Nut
- 42mm Neck Width
- Thin U Neck Contour
- 22 XJ Frets
- Chrome Hardware
- Grover Tuners
- Floyd Rose 1000 Series Bridge
- Seymour Duncan JB (B) & Duncan Designed SC-101 (N&M)
- Finish: BLK w/ Custom Graphic
Ibanez RG570 Black
Traded my Agile AL2000 Black & Gold for this Ibby. Very cool guitar. It has Guitarheads pickups in it and they sound great. After a near fatal turning of the bridge pivot post too tight, it came out ok. As always I am trying to get the action as tight as I can but I didn't know about the locking screw inside. This RG has the original Edge trem and it feels great. Enough talk, time to go play!
Fullerton Cutlass Bass
Picked this up on a trade from a friend. This is a cool inexpensive bass. Blueburst Burl top. This single cutaway design bass guitar features a 32 scale neck providing a comfortable fit for smaller hands or guitarists who occasionally double on bass. Two single-coil active pickups deliver that punchy classic sound and the Poplar burl figured top comes in two dramatic, eye catching bursts.
Peavey Predator - Partscaster
Picked this up on a trade with a friend. This is a Peavey Predator body and neck. The black pearloid pickguard and GFS Alnico V pickups where added.. This guitar has some very cool clean tones with a lot of that strat spank.
.JPG)
.JPG)
.JPG)
.JPG)
